| Type |
Shielded |
|---|
| Sensing method |
Inductive type |
|---|
| Sensing distance |
5 mm-10% to +10% |
|---|
| Setting distance |
0 to 4 mm |
|---|
| Differential distance |
10% Max. of sensing distance |
|---|
| Sensing object |
Ferrous metal (Sensitivity lowers with non-ferrous metals.) |
|---|
| Standard sensing object |
Iron 18 x 18 x 1 mm |
|---|
| Power supply voltage |
12 to 24 VDC ripple(p-p) 10% Max. |
|---|
| Operating voltage range |
10 to 30 VDC |
|---|
| Current consumption |
17 mA max. |
|---|
| Control output (Output type) |
NPN voltage-current output |
|---|
| Control output (Switching capacity) |
0 to 200 mA |
|---|
| Indicator |
Detection indicator (red) |
|---|
| Operation mode |
NO |
|---|
| Sensitivity setting |
- |
|---|
| Self-diagnostic output |
- |
|---|
| Protective circuit |
Surge suppressor
Output short-cut protection
Power supply reverse polarity protection |
|---|
| Standard or Different frequency |
Standard |
|---|
| Ambient temperature |
Operating: -25 to 70 ℃
Storage: -25 to 70 ℃ |
|---|
| Ambient humidity |
Operating: 35 to 95%RH
Storage: 3595%RH |
|---|
| Temperature influence |
+/- 10% Max. of sensing distance in temperature range of -25 to +70 CEL
(As the basis for sensing distance of 23 CEL) |
|---|
| Voltage influence |
+/- 2.5% Max. of sensing distance in rated voltage range +/- 15%.
(As the basis for sensing distance at standard power voltage) |
|---|
| Insulation resistance |
50 MOhm Min. at 500 VDC between charged parts and the case |
|---|
| Dielectric strength |
1000 VAC 50/60 Hz for 1 minute between charged parts and the case |
|---|
| Vibration resistance |
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
|---|
| Shock resistance |
1000 m/s**2 for 10 times each in X, Y, and Z directions |
|---|
| Degree of protection |
IEC60529: IP67
Company standard: Oil-proof |
|---|
| Connection method |
Pre-wired models(Cable length: 2 m) |
|---|
| Weight (Packed state) |
approx. 130 g |
|---|
| Material (case) |
Fluoride resin |
|---|
| Material (sensing surface) |
Fluoride resin |
|---|
| Material (clamping nuts) |
Fluoride resin |
|---|
| Material (toothed washer) |
Iron zinc plating |
|---|
| Accessories |
Instruction manual |
|---|
