

Reference:
As of August 8, 2016
Luminous method | Modulated |
---|---|
Sensing method | Through-beam type |
Sensing distance | 0 to 300 mm |
Operation mode | Dark-ON |
Standard sensing object | 2 mm dia. min.: Opaque (Detection of objects up to 0.5 mm wide is possible by using slit installation.) |
Directional angle | 10° to 40° |
Light source (Peak wavelength) | GaAs infrared LED (pulse lighting) |
Indicator | Light indicator (red LEDs on Sensor and Amplifier) |
Power supply voltage | 12 to 24V (-10% to 10%) (ripple (p-p)5% max.) |
Current consumption | Average: 30 mAmax. |
Control output (Output type) | NPNopen collector |
Control output (Load power supply voltage) | 12 to 24 V |
Control output (Load current) | 100 mAmax. |
Control output (Residual voltage) | 1 Vmax. (at 100 mA load current) |
Response time | 1 ms max. for both detection and reset |
Illumination on the surface receiver | 3000 lx max. (incandescent light) 10000 lx max. (sunlight) |
Ambient temperature | Operating: -20 to +55℃ Storage: -20 to +55℃ (with no icing or condensation) |
Ambient humidity | Operating: 5 to 85% Storage: 5 to 85% (with no icing or condensation) |
Vibration resistance | 10 to 55 Hz, 1.5 mm double amplitude for 2 h |
Shock resistance | 500 m/s**2 |
Degree of protection (IEC60529) | IP64 |
Connection method | Pre-wired |
Cable length | 2 m (Cable_length_from_emitter_to_amplifier: 0.5 m) |
Material | Case: ABS resin Lens: Acrylate resin |
Accessories | Slits: 0.5 x 3 mm, 1 x 3 mm, 3 x 0.5 mm, 3 x 1 mm (one each) / Sems screws with spring washers and flat washers: Six M2.6 x 12 / Instruction Manual |