Din Rail Mounting Contacts: 1CO/16 Amps, 230VAC

Weekly/Daily Programmes

Programmes: 30

Minimum Setting interval: 1 min

Accuracy: 1.5 sec/day

Size: 2 Din Modules

Recessed/Ceiling Mounting

Contacts: 1NO/10 Amps

Ambient Light Level: 5 to 350 lux

Adj. Time Delay for Switch OFF : 10 sec to 12 min

Rated Load: AC1 230VA

The 20.22.9.024.0000 is a 2-pole Modular Step Relay with DC coil, 20.22 series. Double phase switch 2NO (DPST-NO), test button with mechanical indicators. Possible to connect illuminated pushbuttons with the additional part 026.00. AgNi, cadmium-free contact. Module for illuminated...

The Finder 20 series are modular step relays. These electromechanical relays are single or double pole 16A step relays with din rail mounting feature.

Switching capacity of 6A at 250VAC

Test button with mechanical indicators

17.4mm wide

Cadmium free contact...

Belonging to the 3M™ Volition™ Network Solutions, this 350 MHz UTP Category 6 cable will deliver the best performance when used with the 3M TM RJ45 K6 jacks, to give highest margins over Category 6 / TIA/EIA 568 and ISO 11801 and EN 50173 Class E standards.

Finder DPDT Non-Latching Relay Plug In, 24V /220v Coil, 8 A

 Part No. 46.52.9.024.0074 Manufacturer Finder

Type: 46.52 8 Pin (Flat)

Coil Voltage: 24VDC or 230VAC Contacts: 2CO (DPDT), 8A

Finder Plug In Non-Latching Relay - DPDT, 230V ac Coil, 12 A Switching Current, 2 Pole

Mfr. Part No. 56.32.8.230.0040 Brand Finder

“FINDER” MINIATURE POWER PLUG-IN RELAYS : Series 56.32/56.34

I. Miniature Power Plug-in Relay 12 Amp with

lockable test button +...

 20A (250VAC) resistive load

 8A (250VAC) motor load

 6A (30VDC)

 Maximum depth: 40 meters

 Protection Grade: IP68

 Length of Cable: 5 meters

Type: 7T810 Surface/Din Rail Contacts: 1C 10/6 Amps 

(Please use terminal 2 & terminal C for operating Fan for cooling/exhaust)